Menu Close

How do you reset the service light on a Mercedes Sprinter?

How do you reset the service light on a Mercedes Sprinter?

How to reset Mercedes Sprinter Service Reminder

  1. Insert key in the ignition and turn to position II.
  2. Press the menu buttons.
  3. Press up arrow until you see Service A in xxx miles or Service B in xxx miles.
  4. Press the 0 reset button on the side of the instrument cluster and hold until you hear a beep.

How do you reset the service light on a 2006 Mercedes Sprinter?

Reset service light indicator Mercedes Sprinter

  1. Highlight service clock then switch to ignition position 2 on.
  2. .
  3. Press miles (button mi from the picture) button 2 times quickly.
  4. .
  5. Switch ignition off.
  6. Immediatley press & hold in miles button and keep held in.
  7. Switch ignition back on.

What is Mercedes Sprinter Service A?

Mercedes-Benz Sprinter Service A Service A consists of the following: Diesel Exhaust Fluid Replacement. Mercedes-Benz Synthetic Motor Oil Replacement*** Fluid level Inspections and Corrections. Oil Filter Replacement***

How do I change the language on a Sprinter van?

It will take navigate inside the menu to find the parameter section which is usually symbolized by a toothed wheel, and then language icon. Once on the language configuration screen, you will need to to select the one that suits you on the given list.

How often should you change the oil in a Sprinter van?

Mercedes-Benz Sprinter Van Service Intervals

Synthetic motor oil replacement Every 20,000 miles or 1 year for diesels / Every 15,000 miles or 1 year for gasoline engines
Fuel filter replacement (diesel models) Every 20,000 miles or 1 year (diesel engines only)

How do you reset a Sprinter van?

Press button 0 on the instrument cluster for approximately 30 seconds until a beep sounds. III. Press button M (1) on the instrument cluster until “rESEt StoP” is shown on the display together with the oil can symbol.

How do I reset the service light on my Sprinter van?

After this, you need to hold down the 0 button on the dash until you hear a beep, this could take about 17 seconds Next, you press the ▲ up button all the way till you get to the Service Interval with a wrench symbol Then pressing the ▲ up arrow on the steering until it says there Confirmed Service Complete Reset

How to reset Mercedes Sprinter service indicator without scan tool?

Allow all the warnings and messages to clear and the mileage displays before next step Press and hold the “0” button on the instrument cluster for 30 seconds or until you hear a beep Press and hold the “0” button again for 3 seconds then release and press it again

When do you get service a on a sprinter?

Service A and B Explained Typically, Service A** is performed after the first 10,000 miles or 1 year of ownership. For Sprinter Vans 2009 model-year and newer, the Service A interval changes to every 20,000 miles or 2 years after the initial visit. So, you can expect to schedule a Service A appointment at 10K, 30K, 50K, 70K miles, etc.

Is there a button on the steering wheel on a Sprinter van?

Not all Sprinter Vans have buttons on their steering wheel, and this method does not require those buttons. So let’s go ahead now and try it for ourselves. Once you get there, you need to hold down the 0 button on the cluster for about 15 seconds until you hear the beep